| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti |
|---|---|---|---|---|---|---|---|
| 0 – 0.4 |
0 – 0.4 |
0 – 0.1 |
0.4 – 1.0 |
4.0 – 4.9 |
0.05 – 0.25 |
0 – 0.25 |
0 – 0.15 |
This universal alloy (here cast version – applies to flat material only) has a very high corrosion resistance and can be used effectively in seawater. The cast material is stress-free and therefore easier to machine. Furthermore, EN AW-5083 is very well suited for hard anodising, technical anodising and protective coatings.
Apparatus engineering, container and vehicle construction, refrigeration technology, naval construction, laminating tools, blow moulds, injection moulds, tool making, mould- and model making.
This high strength cast aluminium plate is particularly characterised due to its very good dimensional stability which is combined with very good machinability and is both technically and hard anodisable. In addition the material is weldable and has a good corrosion resistance.
Tool making, mould making, model making, transfer plates, base plates, table tops, mounting plates, mechanical parts, mechanical engineering, jigs and fixtures, injection moulding tools, defence technology, press components.
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti |
|---|---|---|---|---|---|---|---|
| 0 – 0.25 |
0 – 0.4 |
0 – 0.25 |
0 – 0.1 |
1.2 – 1.8 |
0.08 – 0.18 |
5.0 – 6.0 |
0 – 0.1 |
8 ALUMINIUM GRADES 4,307 DIMENSIONS
EX WORKS FROM OSNABRÜCK
DELIVERY IN 3-5 WORKING DAYS (SUBJECT TO AVAILABILITY)
WITHOUT MINIMUM ORDER VALUE OR QUANTITY
FROM EUROPE'S LARGEST RANGE OF SEMI-FINISHED PRODUCTS
SPECIAL CUSTOM DIMENSIONS SAWN
If you have any comments or questions regarding ABRAMS PREMIUM STEEL® products or this website, please do not hesitate to contact us.
Please feel free to call us at any time:
