Specifications
We offer 33.895 different specifications in our standard sizes.
If you do not see your size listed, we are capable of producing non-standard items upon request so don’t hesitate to ask.
Precision flat steel without machining allowance acc. to DIN 59350 [PFS]
For example: 100.0 x 20.0 x 1,000 mm
• W ground / milled, tol. +0.2 / -0 mm
• T coplanar ground, tol. +0.05 / -0 mm
• L milled / sawn, tol. +35 / -0 mm
• Exception: PREMIUM 1.1730 – BS 1.1730: W +0.4 / -0mm; T +0.25 / -0 mm
Precision flat steel with machining allowance [PFS/BA]
For example: 100.3 x 20.3 x 1,000 mm
• W ground / milled, tol. +0.4 / -0 mm
• T coplanar ground / finely milled, tol. +0.4 / -0 mm
• L milled / sawn, tol. +35 / -0 mm
€co-Präz® [€co]
For example: 103 x 20.3 x 500 mm
• W sawn / black, tol. +3 / -0 mm
• T finely milled, tol. +0.4 / -0 mm
• L sawn / black, tol. +15 / -0 mm
Hart-Präz® [Hart]
For example: 250 x 10.2 x 500 mm
• W sawn / black, tol. +10 / -0mm
• T coplanar ground, tol. +0.2 / -0 mm
• L sawn / black, tol. +10 / -0 mm
• Planeness: +0.2/-0 mm of the entire surface (aspired)
Premium P-Plates [PPP]
Bsp.: 296.0 x 346,0 x 17.0 mm
• W finely milled, Tol. +0.15 / -0 mm
• L finely milled, Tol. +0.15 / -0 mm
• T ground, Tol. +0.35 / +0.20 mm
EDM Block / Erosion Block – annealed or hardened [EDM]
For example: 200.3 x 200.3 x 40.0 mm
• Square dimension milled / ground, tol. +2 / -0 mm
• T finely milled / ground, tol. +0.25 / -0 mm
• Grain structure is vertically directed in relation to base surface
Precision round steel without machining allowance [PRS]
• bright ground, tol.: Ø ISO h8, L +10 / -10 mm
• bright drawn / finely peeled / ground, tol.: Ø ISO h9, L +10 / -10 mm
• fine turned, tol.: Ø ISO h11, L +10 / -10 mm
Precision round steel with machining allowance [PRS/BA]
• peeled / rough-turned, tol.: Ø +tol. / -0 mm, L +tol. / -0 mm
• Exception PREMIUM 1.3343 – AISI/SAE M2: L 1,000 mm: tol. L +10 / -10 mm
• Particularity: PREMIUM 1.2826 – BS 1.2826, PREMIUM 1.2360 – AISI/SAE ~Chipper, PREMIUM 1.2067 – AISI/SAE L3:
Ø are metric full values (for example 30.0 mm), therefore there is no basic allowance (for example 30.5 mm)
Round Steel / Round Bar [RS]
• black, tol.: Ø +1 / -1 mm (aspired), L +Tol. / -0 mm
